Building Standards Limited is the Best Laboratory testing services or material engineering in Lahore, Punjab, Pakistan. we perform all type of construction material laboratory or lab testing services like a concrete cylinder, concrete cube, soil, mix design, and many other related testings

Building Standards Limited Provide Laboratory, Geotechnical Investigation, Field, Chemical, Pavement Investigation, Concrete, Soil, Ferroscanning, Corrosion Analysis, Chloride ion Penetration, Concrete Resistivity, Ultrasonic Pulse Velocity Test. Rebound Hammer, Fire Damage Evaluation, Active & Passive Fire Safety, Pullout Test, Non-Destructive Testing, Structural inspection and stability certification, Structural Audit and Evaluation Services, Quality Assurance and monitoring for Construction Projects, Construction Monitoring and Quality Control Services and testing

Our field testing services include: Steel and concrete structure strength and analysis. Aggregate testing Destructive and non-destructive(NDT) testing Water Proofing Anchor/Rebar pull out strength testing extraction of asphalt sample by diamond coring Concrete Coring Bond strength testing Ferro scanning testing Asphalt testing Soil testing Geotechnical tests Pavement evaluation

Building Standards Limited provide chemical testing in Lime, Sulphate, Chloride, Carbonate, Nitrate, Sodium, Chloride, Sulphate, and Organic matter content of the soil. pH value and Total soluble salt of soil/water. Organic Content in soil by loss on ignition. Cement content (soil-cement mixture). Cement content (in concrete). Organic Impurities. Relative density.

Building Standards Limited provide the best soil testing like California Bearing Ratio (CBR) Test (astm), Atterberg limits (astm), Consolidation Test (astm), Direct Shear (astm), Triaxial shear test (astm), Electricity resistivity (astm), Gradation of fine and coarse aggregate (astm), Hydraulic conductivity (astm), Hydrometer Analysis, Moisture content in Soil and Aggregate, Specific gravity of Soil and Aggregate, Soil Permeability Test, pH Test, Proctors Lab Density Test (astm), Soil density (astm), Field density (astm), Unconfined compression Test.

A complete range of testing is available for the evaluation of fire damage evaluation, fire damage evaluation, fire damaged structures, rehabilitation, and retrofitting design. Our services in this sector are available from preliminary site investigation to the detailed examination of structure for the extent of damage and its serviceability.

We offer active and passive fire safety design and supervision for building and provide automation building design for both pre-construction design and post-construction status to facilitate the customer requirements as per international standards. We also offer cost-effective and efficient fire safety material supply guideline to meet the latest UL, NFPA, and astm Standards.

Building Standards Limited provide Destructive and nondestructive (NDT) Dye Penetration Test, UTG-Ultrasonic Thickness Measurement Test, Measurement of Coating Thickness, Magnetic Pull-off Coating Thickness, Surface Profile Gauge Measurement for Blasted Steel & Textured Coating, Concentrations of Salt on Metal Surface tests services in Pakistan.

Building Standards Limited Projects Criteria in Laboratory, Geotechnical Investigation, Field, Chemical, Pavement Investigation, Concrete, Soil, Ferroscanning, Corrosion Analysis, Chloride ion Penetration, Concrete Resistivity, Ultrasonic Pulse Velocity Test. Rebound Hammer, Fire Damage Evaluation, Active & Passive Fire Safety, Pullout Test, Plate Loading Test, Non-Destructive Testing

BS Pakistan’s growing laboratory testing, engineering consultancy company, and performs many more engineering services. we are in the best to ten(10) firms in Pakistan

Contact us without wasting time because our sports team always here to help you. Please send inquiries regarding consultancy - Laboratory & Field Testing Analysis

Building Standards Limited performs Structural Audit and Evaluation Services. in Lahore - Pakistan

Building Standards Limited offers a full range of inspection and quality control services on the project site and can provide a full lab testing facility at the construction site. Our field engineers can maintain quality control during each phase of construction from excavation to final completion of services including MEP, Fire suppression & Fireproofing systems. Our quality assurance program includes full-time construction quality monitoring and construction supervision at all critical stages of construction work.

Quality monitoring can be the most critical dimension in a construction project. To ensure that the design criteria are met, unknown condition detected and potentially costly setbacks and dangers avoided, Building Standards Limited provide a system of controls testing and inspection procedures essential to the lifelong stability and performance of any project.

California bearing ratio (CRB) test is used to evaluate subgrade strength for the design of flexible pavements, roads and runways. CBR test results are used as guidelines for the determination of component thickness layers in road and airfields structure. Building Standards Limited can provide accurate test results for CBR test of subgrade, base and subbase material for the design of road and pavement within optimum timeline and low budget.

Consolidation test used for fine-grained soil (which include clays and silt) is given special consideration in the foundation design of civil structure due to the problematic nature of such soils. Consolidation test results are used to determine the magnitude and rate of differential settlement of the foundation over a longer period of time. This test also provides an estimated total settlement value of structure which is essential for the design of building placed on soft clays and fine-grained silts. Building Standards Limited lab has experienced and trained staff with reliable test equipment to provide accurate results at reasonable rates.

Our Services Includes, Sampling of Aggregate (astm). Gradation of fine and coarse aggregate (astm). Los Angeles Abrasion. Flakiness and Elongation Index (astm). Specific gravity and water absorption Test (Fine) (astm). Specific gravity and water absorption (Coarse) (astm). Clay Lumps and Friable Particles (astm). Lightweight Pieces in Aggregate (astm).

Building Standards Limited offers a complete range of testing for the quality assurance and quality control of these materials in the construction industry. Our services include lab and site testing such as sieve analysis of aggregate, fineness modulus, water absorption, specific gravity, void ratio, flakiness and elongation index and density in accurate and reliable manner.

Compressive strength of cylindrical concrete specimen (astm C-39) tests is performed on sophisticated digital and motorized test machines ensuring accuracy and reliability of test results. This test is very important for quality control and quality monitoring of concrete compressive strength in any construction project and is used as a concrete quality standard worldwide.

Building Standards Limited has an excellent lab facility to perform both modified proctor compaction tests and standard proctor compaction tests accurately and efficiently. Our Laboratory staff is highly trained and our services also include a collection of the samples from the field or from the project site.

Building Standards Limited has Laboratory that offers a reliable and accurate test facility to provide unconfined compression strength test services on cohesive soils. This test is performed only on cohesive soil like clays, silts and silty clays.

Building Standards Ltd. offers comprehensive field density testing services, including the sand Cone Density Test and Core Cutter Test, to determine soil density and compaction. Our tests ensure accurate soil density assessments crucial for construction and engineering projects.

Building Standards Limited is the Best Laboratory testing services or material engineering in Lahore, Punjab, Pakistan. we perform all type of construction material laboratory or lab testing services like a concrete cylinder, concrete cube, soil, mix design, and many other related testings

Capo test with astm C-900 and ES EN 12504-3 to obtain a reliable estimate of in-place compressive strength of old concrete and structural assessment of concrete.

Building Standards Ltd. performs many types of plumbing works like plumbing, sanitary, water supply, sewerage, pipes and fittings/fixture, bathroom, kitchen, seepage, leakages works.

BSL performs testing of building stones (dimensions stones) like marble, granite, sandstone for floors, Kitchen & vanity tops, interior & exterior wall finishes.

Design of all civil engineering structures like Industrial plant buildings, commercial and residential buildings, water retaining structures, bridges and towers etc. require safe and economical structural design with the use of suitable available material satisfying visual acceptability and incorporating architectural profiles. Structural design plays an important role as it governs the cost and duration of the project.

Building Standards Ltd. Performs Water Absorption, Breaking Strength, Modulus of Rupture, Abrasion Resistance, Resistance to low & high Concentration of Acids and Alkalis, Household Chemicals, Swimming Pool Salt and Concentrated Nitric Acid & Sulphuric Acid

Building Standards perform many projects about evaluation and inspection of existing structures in Pakistan. We have a wide range of clients like SNGPL, Stand pharm, AkzoNobel, Sunder Industrial Estate, Lahore-Tetra Pak, Akzo Nobel Pakistan Limited

Building standards ltd. performs NON-DESTRUCTIVE - NDT, Ferroscanning, Corrosion Analysis, Chloride ion Penetration, Concrete Resistivity, Ultrasonic Pulse Velocity Test. Rebound Hammer we have a wide range of clients in Pakistan Kohinoor Textile Mills, Imperium Hospitality (Pvt.) Ltd, Riphah International University RIU, AJ Textile Mills Ltd, Treet Corporation Limited, Allied Bank Ltd, Zeeruk International Pvt. Ltd ets..

Building Standards Ltd. performed many structural stability projects of many clients like Sundar Industrial Estate, Packages Limited and many other clients

Building standards Ltd performed many projects about crack analysis at bestway cement plant Kallar Kahar and etc..

Building Standards Ltd. performed many projects about capo in Pakistan like Mall of Garden Town, Gulberg-III, National Educational Network (Pvt.) Ltd.

Building Standards Ltd. performed many projects about fire damaged building analysis in Pakistan like Packages Mall, Hafeez Trade Center, Purechem and many more

Building Standards Ltd. performed many projects in Pakistan. BLS Clients are PHA, IK Associates, Lyallpur Galleria, Slab Load Test, SYS Construction, Quaid-e-Azam Industrial Estate, Walton Road, Packages Convertors and many more

Building Standards Ltd.performed many projects in Pakistan ( Ferozsons Laboratories Ltd., Punjab College,Tapal Tex Pvt. Ltd, COMSAT University, Akzonobel Pakistan, AA Cotton Mills, Fatima Fertilizer Company, Pharmagen Limited, University of South Asia, Namal Education Foundation,United Associates,Gulf Ventures (Pvt.) Ltd,Nayyar Ali Dada & Associates,AYQ Developers (Pvt.) Ltd )

Building standards ltd. performs quality assurance, NON-DESTRUCTIVE - NDT, Ferroscanning, Corrosion Analysis, Chloride ion Penetration, Concrete Resistivity, Ultrasonic Pulse Velocity Test. Rebound Hammer we have a wide range of clients in Pakistan Kohinoor Textile Mills, Imperium Hospitality (Pvt.) Ltd, Riphah International University RIU, AJ Textile Mills Ltd, Treet Corporation Limited, Allied Bank Ltd, Zeeruk International Pvt. Ltd ets..

Building Standards Limited has met the requirements of ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, Professional Tax Lahore & Certificate Of Registration Of Pakistani Consulting Engineer(PEC)

Guy wire testing- Wire Tension Testing Accurate & reliable measurement of pre-loaded wire rope/guy wire/wire cable and masts. Testing service to measure the tension of overhead suspension ropes for railway catenaries is also available. The instrument can be used to measure the tension force up to 20 metric tons/200 kN for the rope diameter in the range between 6mm to 37mm.

A prime source of deterioration in foundations and superstructures is the use of low-pH soil and fine aggregate. Low pH speeds up the process of degradation of concrete which leads to the development of pores and cracks in concrete. Due to damage of concrete cover the rate of corrosion of steel reinforcement increases exponentially. The most economical solution to this problem is the use of a cheap stabilizing agent to improve the engineering properties of soil. Our laboratory offers soil stabilization services according to astm standards, which entail determining the optimal percentage of stabilizing agent. This procedure not only neutralizes the soil's pH value but also enhances its strength and durability, reduces swelling and shrinkage, boosts erosion resistance, improves workability, and provides a cost-effective solution to the problem.

BSL offers limited non-destructive testing NDT techniques to accurately assess the in-place conditions of historic masonry structures and heritage sites. Non-destructive techniques do not disrupt the materials used in the construction for the archeological sites additionally the historic materials are not destroyed. Currently, the following NDT services are available: Rebound Hammer Test, Ultrasonic Velocity Testing, In-situ Bond Strength Test:

Generally, tests for identification of metals and alloys are expensive and time-consuming. BSL offers a quick and economical method for qualitative analysis of metals to its clients. Chemical spot testing is a reliable method for rapid identification of metals and alloys used in the fabrication of machinery, equipment, tools, and plants used in food, medical, testing and other fields. This method facilitates the customer to quickly verify the quality of delivered product without damaging the hardware. These tests are conducted on the surface of the metal, and the test location can be cleaned simply by using an abrasive cloth or a smooth file.

BSL performs a structural evaluation for the integrity testing of solar panels over rooftops of existing structures. Our expert engineers can calculate the strength of the existing roofs to withstand the expected loads of solar panels and provide cost-effective designs to install solar panel plates/assembly over different types of roof structures like RCC slab, Shell roof, Precast Roof Structure, and PEB structures.

Building Standards Limited offers a full range of inspection quality control and quality assurance services on the project site and can provide a full lab testing facility at the construction site. Our field engineers can maintain quality control during each phase of construction from excavation to final completion of services including MEP, Fire suppression, and fireproofing systems. Our quality assurance program includes full-time construction quality monitoring and construction supervision at all critical stages of construction work.

Building Standards Limited performs STRUCTURAL INSPECTION & STABILITY CERTIFICATION in Lahore Pakistan

Building Standards Limited performs Structural Audit and Evaluation Services. in Lahore - Pakistan

Building Standards Ltd provides services for structural design and analysis.

we are performing testing about Resistance to Heat, Impact Test Corrosion test by (Salt Spray Method), Insulation Resistance and Electric Strength, Resistance to Aging, Vibration Test, Thermal Shock test, Thermal Cycle Test, Humidity Test

bsl-projects-st-andrews-church

Building Standards Ltd. provides Vicat Needle Testing to determine the setting time and consistency of hydraulic cement. Using both manual and automatic methods, our tests ensure accurate workability assessments crucial for construction projects.

Building Standards Ltd. offers Fineness Modulus testing for sand, determining particle size distribution through sieve analysis. This test ensures sand quality and suitability for concrete mixes and construction applications.

Building Standards Ltd. conducts the Los Angeles Abrasion Test to measure aggregate hardness and durability. Using a rotating drum and steel spheres, we assess aggregate quality for construction projects through percent loss after impact and grinding.

At Building Standards Ltd., we perform Compressive Strength Tests on solid and hollow blocks to ensure their structural integrity. By applying controlled compressive force, we determine their load-bearing capacity, verifying compliance with industry standards for construction applications.

Building Standards Ltd. conducts the Water Content Test to determine the moisture content of soil, rock, and related materials. By drying specimens in an oven and measuring mass loss, we assess air, water, and solid relationships within the material volume.

Building Standards Ltd. performs the Flakiness and Elongation Index test to measure the percentage of flat and elongated particles in coarse aggregates. This test ensures aggregates meet standards for compaction and structural integrity in construction projects.

Building Standards Ltd. offers pH Value testing to monitor carbonation in concrete, essential for preventing steel reinforcement corrosion. Our services include Carbon Depth Testing, Sample Drilling, and Analysis to ensure concrete durability and structural integrity.

Building Standards Ltd. performs the Plasticity Index Test to determine soil's liquid and plastic limits, yielding the plasticity index. This essential test provides insights into soil behavior, such as shrinkage under changing moisture conditions.

Building Standards Ltd. conducts Proctor Tests, including Standard and Modified methods (astm D 698 and astm D 1557), to determine soil compaction characteristics. These tests establish the relationship between water content and dry unit weight, crucial for construction and engineering projects.

Building Standards Ltd. provides soil salinity testing services based on astm D 4542 to assess salt concentration through electrical conductivity measurements. Our tests determine total dissolved solids, offering insights into soil salinity levels and changes over time.

Building Standards Ltd, sand compaction test, omc test, astm D 1557, astm D 698, soil compaction testing, maximum density, moisture content adjustment, construction stability, construction durability, soil testing, compaction control

Building Standards Ltd. performs the sand Equivalent Test (astm D2419) to evaluate the presence of clay-like fines and dust in granular soils and fine aggregates. This test ensures construction materials meet quality standards by assessing particle composition and minimizing undesirable fines.

Building Standards Ltd. conducts Sieve Analysis (astm D 6913) to determine particle-size distribution and gradation of soils. This test separates soil particles into size ranges using specific sieve criteria, crucial for assessing soil quality and suitability for construction.

: Building Standards Ltd. conducts the Sodium Sulfate Soundness Test (astm C 88) to assess aggregate durability through simulated weathering cycles. This test evaluates aggregate resistance to deterioration, crucial for ensuring construction material longevity.

Building Standards Ltd. conducts Specific Gravity tests (astm C 128/astm C 127) to determine the density of aggregates. This test evaluates the density in different conditions—oven-dry and saturated-surface-dry—essential for construction quality control.

Building Standards Ltd. performs astm A 615/615M tests to determine steel bar tensile properties, including percentage elongation and ultimate strength. These tests ensure steel bars meet performance standards for structural and industrial applications.

Building Standards Ltd. conducts the Bend Test of Reinforcement Steel Rebar (astm A 615) to assess bending performance. This test ensures rebar can be bent without significant strength loss, crucial for reinforcing concrete structures.

Our expert team of structural engineers specializes in performing detailed structural analysis for commercial and industrial buildings. Utilizing advanced 3D modeling software like ETABS, Staad Pro, and SAP, we adhere to international standards such as AISC, ASCE, UBC, and IBC. We design steel and RCC structures with a focus on strength, serviceability, and economic efficiency, ensuring robust and reliable solutions that meet and exceed client expectations.

Building Standards Ltd. offers the Flat Jack Test for estimating in-situ compressive strength of solid unit masonry, following astm C-1196 standards. This non-destructive test is ideal for older brick masonry buildings where sample extraction is difficult. Now available in Pakistan.

An experienced BSL team performs ACM and ACBM asbestos inspection surveys for buildings undergoing renovation. Compliant with astm E2356 to ensure safety and prevent asbestos exposure.

Ensure successful retrofitting, repair, and rehabilitation of concrete and steel structures by selecting suitable materials and following international standards. BSL offers third-party inspection and testing services, quality assurance, and post-construction certification with advanced testing and expertise